Nanoindentation study on mechanical properties and curing depth of dental resin nanocomposites

Zha, C., Hu, J., Li, A., Huang, S., Liu, H., Chen, G., & Wang, Z.

Polymer Composites.

Mechanical properties and curing depth of bisphenol‐α‐glycidyl methacrylate/triethylene glycol dimethacrylate‐based dental composites were systematically investigated by site‐specific nanoindentation tests. Effects of filler (20‐nm silica nanoparticle) content on the nanohardness and elastic modulus of the composites were studied in comparison with micromechanics theoretical models. Results showed that the incorporation of the silica nanoparticles at low contents (up to 5.66 vol%) significantly increases the hardness and elastic modulus of the dental composites by up to 65% and 30%, respectively. It was found that the Counto model gave good predictions for the composite modulus as a function of filler content. For the specific composites studied here, the depth of cure increases approximately linearly with the filler content, which may be ascribed to the stronger reinforcement effect of the silica nanoparticles on the dental composites at a higher particle content. These results combined demonstrate the effectiveness of silica nanoparticles as the reinforcement for dental restorative materials even at small volume fractions. POLYM. COMPOS.2018. © 2018 Society of Plastics Engineers

Nanoindentation-study-on-mechanical-properties-and-curing-depth-of-dental-resin-nanocomposites

Products Used in this Publication

Catalog NumberCASProduct NamePrice
143-22-6143-22-6Triethylene glycol momobutyl etherInquiry
1565-94-21565-94-2Bisphenol A glycerolate dimethacrylateInquiry

Related Products

Catalog NumberCASProduct NamePrice
B0084-353235288847-35-8OXi-4503Inquiry
B0046-463789128-13-2Ursodeoxycholic acidInquiry
B0046-463795304-55-2DMSAInquiry
B0046-464010560130-42-9Telavancin hydrochlorideInquiry
B0046-4640151115-70-4Metformin hydrochlorideInquiry